do the third brake light
yeah, I want to.
I took out all the wiring for it.
I’m just not sure how to actually fill that big ass hole.
get a small piece of sheet metal about the size of the brake light
drill a hole or two
bend it a bit so it will squeeze in there
put metal epoxy on the sheet metal and then get a vice grip to put in the holes and pull the metal back flat to the hatch and let it cure
then just bondo over it
that’s how i’m doing it
I shaved my third brake light and antenna hole
Well, the body shop did
If I could do it again I’d also shave the rear marker lenses
You should get it welded though imo
It seems like epoxy might fall off after time, which might be kinda wack later down the road
Even tack weld should be good enuff
What Logan said – get the holes welded neat then just skim over them. Otherwise you’ll get sagging down the line somewhere.
I’m so confused as to how you do it.
get about 50 washers
epoxy them all until it fills the gap
can you reach inside there or what?
it looks like this
tack weld is best, other way seems like crack city
so, are you supposed to weld metal over the hole, or BEHIND the hole?
Fill in your details below or click an icon to log in:
You are commenting using your WordPress.com account. ( Log Out / Change )
You are commenting using your Twitter account. ( Log Out / Change )
You are commenting using your Facebook account. ( Log Out / Change )
You are commenting using your Google+ account. ( Log Out / Change )
Connecting to %s
Notify me of new comments via email.